| |
|
For purposes of safety, uniformity of instruction and functionality, gear configurations for water work and training exercises must be the same for instructors and students.
Standardized rigging of bottom and stage cylinders, isolation manifolds, cylinder gauges, inflators, primary regulators, and backup regulators is crucial to the safety, success and effectiveness of technical diver training.
NOTE: Students attending in higher levels of technical diving certification must know NAUI Technical Equipment Configuration and be able to demonstrate it properly.
EQUIPMENT NEEDED FOR NAUI TECHNICAL DIVING CLASSES
- Backplate (no plastic) with one single webbing, no quick release, and 4 d-rings; plus crotch strap with d-ring
- Wing's with 45-55 pounds lift-no bungee type
- Double Cylinder Tanks for EAN with minimum gas capacity of 160 cu ft. Steel doubles preferred when using dry suit
- DIN Isolation Manifold on double cylinder tanks-300 DIN preferred
- Two DIN Regulators, high performance, for doubles.
- One with 7 foot 2 nd stage hose the other with 24 inch 2 nd stage hose plus strap for around neck
- Brass Pressure Gauge on 24-inch hose for doubles--no consoles
- Stage Tank Cylinder for 100% O2, aluminum 40 cu ft preferred
- Regulator with 40-inch hose for stage tank cylinder with brass pressure gauge on 6-inch hose.
- Hip mounted Light Canister, and head with optional Goodman handle.
- Scout Light (two depending on location)
- Two Bottom Timers
- Depth Gauge wrist mounted
- Primary Reel with minimum 250 ft. line
- Spool with minimum 120 ft. line
- Lift Bag (two if drift deco planned)
- Cutting device, mounted on the waist belt
- Primary Mask plus second backup Mask
- Non-buoyant Fins with optional stainless steel spring straps--no V cut
- Wrist Slate for tables (or wet notes)
- Two Leg Pockets on Dry or Wet Suit for extra gear
- Snorkel-not needed but optional
- Optional-- Argon cylinder tank for Dry Suit
|